For the complete documentation index, see llms.txt. This page is also available as Markdown.
Configure a meter change
Configure meter replacement
A The meter may fail or be replaced by a new one . If only the new meter reading were adopted, already recorded values could be lost, which would lead to data gaps and calculation errors .
To prevent this, Eliona offers the option to configure an offset — either manually or via automatic detection.
Set an offset for a meter
Open the asset details of the affected asset.
Click the attribute, for which the offset is to be configured [A].
Activate the offset function [B].
Choose one of the following methods:
Enter value manually: The offset value is permanently added to all new measured values.
Enable automatic calculation: Eliona automatically detects when a meter replacement has occurred.
If the new value drops by more than 10%, an offset is set automatically.
Instead of continuing to count with the new value, the previous value remains as the base preserved.
