Xovis People Counter
Subchapter content: Configuration of Xovis People Counter
Xovis offers sensors for reliable people counting. The sensor data can be integrated into Eliona and linked with assets. Set up your Xovis devices under Settings > Apps > Xovis People Counter:
To add a new device, click on 
.
Host: Enter the network hostname of the device.
MAC Address: Permanent hardware address of the device (printed on a label at the bottom of the device).
Timeout: Set the timeout for the HTTP request.
Interval: Select a request interval for retrieving data from the device.
Password: Enter the password.
Reset Time: Select the time at which the counter is reset to 0.
Asset: Select the corresponding Eliona asset of the device.
Certificate Check: Disable this field to access devices without a signed certificate (i.e. locally in the network). If the device is accessed via the internet, the certificate should be checked to avoid MITM attacks.
API Version 5: Leave disabled only for old firmware (v3 and v4). For all new installations, v5 should be used.
Admin: Select the user type.
Description: Enter a description of the device.
Port: Enter the port of the device.
Stream: Allows receiving push updates from the device.
Counter
Xovis people counters allow configuring multiple counters per device (lines and areas).
The counters are set up in the Xovis configuration (on the device itself) and then automatically transmitted to Eliona. In Eliona, the counters and corresponding asset types are created automatically.
Data Push (Live update from Xovis)
Xovis
Settings" -> "Single Sensor Settings" -> "Data Push".
Add new connection
Protocol: HTTP/HTTPS
Enable SSL/TLS: ON
Authentication: None
Advanced settings: Custom header -> Add -> Header name:
X-API-Key, header value:**secureElionaApiV2Key**-> Save
Add new agent
Schedule: Immediate
Data format -> Format: JSON, format version: 5.0, time format
RFC 3339Data filtering -> Scene events: None, Objects: None, Count events: All, Info events: None
Last updated
Was this helpful?