> For the complete documentation index, see [llms.txt](https://docs.buildings.ability.abb/collection/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.buildings.ability.abb/collection/english-v14/documentation/alarme-regeln-und-eskalationen/eskalationen/wiederholte-eskalationen-konfigurieren.md).

# Configure repeated escalations

Repeat alarm notifications for each user and escalation channel, limited or unlimited.

With repeated escalations, you remind a user again about an alarm that is still pending and unacknowledged. For each combination of user and escalation channel, you define the interval and how often the notification is repeated.

For example, you can repeat email notifications for one user without applying the same settings to their SMS channel or to other users.

## Prerequisites

* You have [-> created an escalation](https://docs.buildings.ability.abb/collection/english-v14/documentation/alarme-regeln-und-eskalationen/eskalationen/eine-neue-eskalationen-erstellen.md) and the [-> configured users, targets, and schedules](https://docs.buildings.ability.abb/collection/english-v14/documentation/alarme-regeln-und-eskalationen/eskalationen/eine-eskalation-konfigurieren.md).
* The desired [-> escalation channel](https://docs.buildings.ability.abb/collection/english-v14/documentation/alarme-regeln-und-eskalationen/eskalationen/notification-provider.md) and the [-> user contact details](https://docs.buildings.ability.abb/collection/english-v14/documentation/alarme-regeln-und-eskalationen/eskalationen/nutzer-fur-eskalationen-konfigurieren.md) are set up.
* You can edit the escalation targets.
* The repeat function is available in your installation.

## Settings

The figure shows the English-language interface. The following steps use its labels.

<div data-full-width="true"><figure><img src="https://156899794-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FNyvwhz1kEMXcHf4HLuZ8%2Fuploads%2Fgit-blob-29da467e54dbcd4793502aa2cb469301aa4b44da%2Fv14-repeated-escalation.png?alt=media" alt="Eskalationskonfiguration mit Wiederholungsintervall, begrenzter Wiederholungsanzahl und ausgeschalteter unbegrenzter Wiederholung für ein E-Mail-Ziel"><figcaption><p>Fig. 1 – Repetition for a single user and channel target; the personal name is hidden</p></figcaption></figure></div>

| Element  | Setting               | Meaning                                                                                                                                             |
| -------- | --------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------- |
| **\[B]** | **Repeat every**      | Interval between repetitions. Available choices are 1, 2, 5, 10, 15, 30, and 60 minutes. **No repeat** turns off repetition.                        |
| **\[C]** | **Repeat up to**      | Maximum number of additional repetitions after the first notification. Available choices are 1, 2, 3, 4, 5, 10, 15, and 20 repetitions.             |
| **\[D]** | **Unlimited repeats** | Repeats without a fixed number as long as the alarm is still pending and unacknowledged. When this option is enabled, **Repeat up to** is disabled. |
|          | **Timehold, minutes** | The existing delay time of the first notification. It is not the repeat interval.                                                                   |

Without a repeat interval, the fields for count and unlimited repeat remain disabled. Targets without a repeat setting keep the previous behavior without additional repetitions.

## Set repetition

1. Open **Engineering** **\[A]**.
2. Open **Escalation** and select the desired escalation.
3. Search under **Users & targets** for the desired user.
4. Select the repetition interval for the desired channel under **Repeat every** **\[B]** the repetition interval.
5. Select under **Repeat up to** **\[C]** the maximum number of additional repetitions.\
   ◈ For unlimited repetition, instead enable **Unlimited repeats** **\[D]**.
6. Click on the edited target **Save**.\
   ▷ The repetition settings for this target are saved.
7. Open the escalation again to check the saved settings.

{% hint style="info" %}
In Fig. 1, **2 min** and **4 times** are selected. This means: one initial notification and then up to four additional repetitions at two-minute intervals. Repetition ends earlier if the alarm is acknowledged or is no longer pending.
{% endhint %}

A limited number is suitable if you want to limit the volume of messages. Select **Unlimited repeats**if the reminder should continue without a fixed upper limit until one of the stop conditions occurs. Choose an interval that fits the workflow.

With **Reset all** you discard unsaved changes to the respective target. If, when saving, **Could not save escalation target.** appears, check the entries and try saving the settings again.

## When does repetition end?

Further repetitions end when:

* the alarm is acknowledged;
* the alarm is no longer pending;
* the configured maximum number of additional repetitions is reached.

{% hint style="warning" %}
Changes to repetition settings apply to newly scheduled notifications. Repetitions that have already been scheduled keep the settings with which they were scheduled. Therefore, turning off repetition later does not retroactively end repetitions that have already been scheduled.
{% endhint %}

## Turn off repetition for new notifications

1. Select for the desired target under **Repeat every** **\[B]** the option **No repeat**.
2. Click **Save**.\
   ▷ Newly scheduled notifications for this target will not be repeated.

Further settings for recipients, channels, and schedules can be found under [-> Configure an escalation](https://docs.buildings.ability.abb/collection/english-v14/documentation/alarme-regeln-und-eskalationen/eskalationen/eine-eskalation-konfigurieren.md). Information on grouping notifications can be found under [-> Group escalations](https://docs.buildings.ability.abb/collection/english-v14/documentation/alarme-regeln-und-eskalationen/eskalationen/eskalationen-gruppieren.md).


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.buildings.ability.abb/collection/english-v14/documentation/alarme-regeln-und-eskalationen/eskalationen/wiederholte-eskalationen-konfigurieren.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
