# Configure Localino Anchors

{% hint style="info" %}
You only need this chapter if you are using the Localino App.
{% endhint %}

## Configure Localino Anchors

<div data-full-width="true"><figure><img src="https://3489494878-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F9GvUpaatBiReR43XFSMg%2Fuploads%2FpHqjrs54ullki5erkG03%2FStorey%20Coordinate%20Configurator%201.png?alt=media&#x26;token=7142bb13-5fe8-4d12-93e0-3285196e80e9" alt=""><figcaption></figcaption></figure></div>

1. Open a floor
2. Click on **Configure floor \[A]**

   ▷ The sidebar changes.
3. Click on **Start calibration \[B]**

   ▷ Note: If you see the message **\[G]**, anchors have already been configured for this floor.
4. In field **\[C1]**, specify how high (in meters) the floor of the selected floor is above the ground.
5. In field **\[C2]**, specify how high (in meters) the ceiling of the selected floor is above the ground.
6. Click on **\[C3]**

   ▷ The options for the next step appear
7. In **\[D1]**, select at least 2 anchors
8. Optional: Activate **\[D2]** to filter the list of anchors so that only anchors that are compatible with the previously made entries are displayed.
9. Click on **\[D3]**

   ▷ The anchors **\[E]** appear in the viewport. Individual anchors are displayed as red dots **\[E1]**
10. Drag and drop the anchors into the desired position. The position of the anchors in BuildingPro Suites must correspond as precisely as possible to the position of the hardware devices.

    ▷ You can only move/rotate/scale the anchors as a whole. You cannot edit individual anchors. The position of the respective anchor points to each other was previously determined in the Localino app.

    ▷ You can also rotate and scale the anchor arrangement. If necessary, use **\[E2]** and **\[E3]** to make fine adjustments.
11. Click on **Save \[F]**

    ▷ The settings are applied

## Adjust Localino Anchors afterward

<div data-full-width="true"><figure><img src="https://3489494878-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F9GvUpaatBiReR43XFSMg%2Fuploads%2F6IT184ErM7GPn6rCvPIj%2FStorey%20COordinate%20Configurator%202.png?alt=media&#x26;token=979ff863-4d84-4f08-9d0c-6514f647a4be" alt=""><figcaption></figcaption></figure></div>

You can adjust the configuration of the Localino anchors afterward.

1. Open a floor
2. Click on **Configure floor \[A]**

   ▷ The message **\[G]** appears in the sidebar. If this message is missing, no anchor calibration has been carried out yet.
3. Click on **Reset \[G1]**

   ▷ The message **\[H]** appears
4. Click on **\[H1]**

   ▷ The position of the anchors is reset.

   ▷ All possibly connected Localino trackers are no longer displayed.
5. Proceed as described in the chapter [↗ Configure Localino Anchors.](https://docs.buildings.ability.abb/collection/mandatory-base/platform-core/connect-hub/edge-app-marketplace-for-plug-ins-and-extentions/apps/localino)